How to wire Walkera Devention DEVO RX601 6CH Standard Receiver to RC Servo & DC Power

I recently purchased a DEVO 7E and RX601 to go with a V22 RC model plane. This post is about how to wire the RX601 to RC Servo & DC Power.

See below for the wiring diagram. "S" is for the signal pin to Servo, "+" is for +5V to Servo, and "- "is for GND to Servo.

In the event that all 6 channels are used, a DIY Y-type cable can be used to split the "+" and "-" of a channel so 1-part of "+" and "-" could be used to connect to the Servo and the other pair could be used to connect to the DC power source.

Reference:

DEVO 7 + RX601 Test Video (in Chinese)
https://www.youtube.com/watch?v=URJcCLYzQ3c