無線門窗開啟警報器

此裝置可被安裝於門, 窗, 抽屜, 儲物櫃, 冰箱, 酒櫃等處並於其被開啟時經由E-Mail及短訊等方式提供無聲警報.

產品介紹

使用範例

Email通知樣本

Telegram短訊通知樣本

設定方式

1. 將Jumper Cap裝上JP1.

2. 安裝電池

3. 按下後放開Flash鍵

10. 進入手機無線網路設定處. 點選AutoConnectAP以將手機無線網路連上名為AutoConnectAP之無線基地台.

11. 點選手機畫面下方之 "點擊管理".

12. 點選Configure WiFi.

13. 輸入設定資料, 結束後按畫面下方save鍵.

***IMPORTANT NOTICE ON HOW TO CONSERVE BATTERY POWER***

- When the device is connected to a wireless AP, immediately after sending the door / window open alarm, the device will enter into deep sleep to conserve battery power (even when the door / window is still open);

2. If the device is not connected to any wireless AP, it WILL NOT send door / window open alarm and it WILL NOT enter into deep sleep (it will remain power-on with AutoConnectAP turned on to allow for network connectivity configuration). When this happens, the battery could be drained completely dry in less than 30 minutes. Therefore, it's recommended to remove the battery from the device during transportation and only install battery to the device when there is working wireless AP nearby and you are ready to configure the device to connect to that wireless AP.